Skip to main content
1 Stop Fence Inc — for all your fencing needs

Automatic Gates & Operators

Drive gates that open from the car — sized, framed and wired for the way the opening is actually used.

Large dark composite drive gate with a sand-colored accent band and black steel frame at an alley entrance

An automatic gate is two jobs in one: a gate strong enough to be moved by a machine thousands of times, and an operator matched to that gate. We build both halves — the drive gate itself, in composite, steel or wood, and the slide or swing operator that moves it, with the controls you'll actually use.

Most of the openings we work on are city lots and alley entrances, where space behind the gate is the deciding factor: a swing operator needs room for the leaf to travel, a slide operator needs room alongside. We measure that before recommending anything, for homes and for commercial lots that need controlled access.

Options

Styles and configurations

Slide gate operators

The answer when there is no room for a leaf to swing — the gate rolls alongside the opening instead. Common on alley and driveway entrances.

Swing gate operators

Single or dual arms for gates with clear space behind them. Quiet, simple, and the natural fit for a residential drive.

Controls & access

Remotes, keypads and push-to-open buttons, so residents, tenants or staff get in the way that suits the property.

Safety devices

Photo eyes and safety loops that stop or reverse the gate when something is in its path — the part nobody should skip.

Process

What to expect, step by step

  1. 01

    Measure & free estimate

    We come out, walk the line with you, measure the run and the openings, and give you a written price. No charge, no obligation.

  2. 02

    Material & style

    You pick the material, height and style, and we go through the trade-offs of each one — cost, upkeep, how it will look against your house — before anything is ordered.

  3. 03

    Posts & footings

    Locates are called in, the old fence comes out if there is one, and posts are set in concrete footings below the frost line.

  4. 04

    Panels, gates & hardware

    Panels go up level and stepped to the grade, gates are hung and adjusted, and any operator or hardware is fitted and tested.

  5. 05

    Walkthrough & cleanup

    We walk the finished job with you, show you how the gate and any operator work, and leave the site clean.

Maintenance

Before you automate, check three things

Power at the gate, room for the leaf to travel, and a gate built for the load. Running electricity to the post is usually the item people forget, and it is far cheaper to plan for on the day the posts go in than to retrofit through a finished driveway. Tell us at the estimate and we'll set it up now even if the operator comes later.

FAQ

Questions we get asked

Slide or swing — which one fits my driveway?

It comes down to space. A swing gate needs clear travel for the leaf, uphill or down; a slide gate needs a run of clear ground beside the opening. On a tight city lot the slide usually wins. We measure both before recommending one.

What happens if the power goes out?

Operators have a manual release so the gate can be moved by hand. We show you where it is and how to use it at the walkthrough — before you need it at 6 a.m. in the snow.

Can you automate the gate I already have?

Sometimes. It depends on whether the leaf and the posts can take the load and cycle count. We'll look at the frame, the hinges and the post before we quote anything — a gate that sags by hand will sag faster on a motor.

Is an automatic gate safe around kids?

It is when it is set up properly. Photo eyes and safety loops stop or reverse the gate when something breaks the path, and they belong on every install — residential included.

Free estimates

Tell us what you want built.

Send a few details about your property and we'll get back to you with a free, no-obligation estimate. Prefer to talk it through? Call and ask for a quote — we speak English and Spanish.

CallFree estimate